Hardware unboxing

If nobody tampered with your O3R package, you should have following hardware:

  • Camera head (two of them if you ordered the developer kit) HEAD

  • VPU (Video Processing Unit)
    VPU

  • FPD cables to connect the head(s) to the VPU

You need a strong enough power source: 2.5A and 24V minimum.

  1. First, connect the head(s) to the VPU; the only requirement is to connect pairs of same imager types together, for instance as shown below:
    CONNECTION-OVERVIEW

  2. Connect power to the VPU - ATTENTION: PIN2 is power! PIN3 is ground

  3. Connect the ethernet cable (not included in the package)

  4. Wait until you see the ethernet LED flashing before pinging/connecting to the VPU.

That’s it about the hardware. Next step: software installation.