Introduction to the ifmVisionAssistant
ifmVisionAssistant is a software tool provided by ifm for ifm vision products. It is used as a first configuration and debugging tool. Besides showing the received data, it is also possible to change parameters and showcase the capability of the O3R system (also containing applications e.g. ODS - Obstacle Detection System), and record data.
Installing the ifmVisionAssistant
The ifmVisionAssistant does not need a local installation. It is provided with all needed shared libraries etc. to be run locally and without additional permission (admin) rights.
Be advised, that the PC and the O3R system need to communicate via TCP/IP. To change certain IP settings, specific permissions are mandatory and might only be granted by the respective IT department.
Downloading and unpacking the software
The ifmVisionAssistant is available at www.ifm.com - Article OVP800. E.g. download from the german OVP800 landing page: download.
The ifmVisionAssistant needs to be unpacked/unzipped. Within this unzipped package there is the executable
ifmVisionAssistant.exe, which starts the ifmVisionAssistant.