Changing parameters

Every port parameter can be set manually with the ifmVisionAssistant - under Port settings menu. For example, the switch from CONF to RUN state.

conf to run

Short parameter overview

This documentation does not include the description of every parameter, but rather focus on the general approach to change a parameter. For a list of settings, parameters, etc please check the documentation here

Every port menu includes its own configuration / parameters. These parameters can be changed manually via the ifmVisionAssistant. The ifmVisionAssistant is however not considered as the main configuration tool. This role is fulfilled by the ifm3d-library.

The ifmVisionAssistant is a tool to verify the overall system and experience certain changes live.

The parameters subgroups are automatically split equivalently to the config.json / parameter JSON schema - see ifm3d-library. This means that the configuration of parameters in the ifmVisionAssistant is always up-to-date with the available parameters via the JSON parameter structure.

Symbol

Parameters

Description

general parameter

General port parameter

General settings like mode, state

acquistion parameter

acquisition

Imager configuration related parameters like exposure time

data parameter

data

Information about the transferred data

info parameter

info

Information about the connected hardware like hardware production state.

processing parameter

processing

Parameters for post processing data. Like extrinsic calibration

After changing a parameter, the ifmVisionAssistant will not save the configuration.

Note: The calibrated IMU (Inertial Measurement Unit) system provides parameters at Port 6. Port 6 represents the IMU.